Zhou, Chi

Chi Zhou

PhD

Chi Zhou

PhD

Chi Zhou

PhD

Associate Professor

Director of Graduate Studies

Adjunct Associate Professor

Research Topics

Additive manufacturing, rapid prototyping

Contact Information

401 Bell Hall

Buffalo NY, 14260

Phone: (716) 645-4706

chizhou@buffalo.edu

Biography Publications Teaching Latest News

Zipeng Guo*, Fan Fei, Xuan Song, and Chi Zhou^*. "Analytical Study and Experimental Verification of Shear-Thinning Ink Flow in Direct Ink Writing Process." Journal of Manufacturing Science and Engineering (2023): 1-29.
Luis Javier, Segura, Zebin Li, Chi Zhou, and Hongyue Sun. "Droplet evolution prediction in material jetting via tensor time series analysis." Additive Manufacturing (2023): 103461.
Zebin Li, Luis Javier Segura, Yifu Li, Chi Zhou, and Hongyue Sun. "Multi-class Reinforced Active Learning for Droplet Pinch-off Behaviors Identification in Inkjet Printing." Journal of Manufacturing Science and Engineering (2023): 1-25.
Zipeng Guo*, Lu An, Saurabh Khuje, Aditya Chivate, Jiao Li, Yiquan Wu, Yong Hu, Jason Armstrong, Shenqiang Ren, and Chi Zhou^*. "3D-Printed Electrically Conductive Silicon Carbide." Additive Manufacturing (2022): 103109.
Yong Hu, Zipeng Guo*, Yingjie Chen, Chi Zhou, Yuguang C. Li, and Shenqiang Ren. "Molecular magneto-ionic proton sensor in solid-state proton battery." Nature Communications 13, no. 1 (2022): 7056.
Yong Hu, Jennifer L. Gottfried, Rose Pesce-Rodriguez, Chi-Chin Wu, Scott D. Walck, Zhiyu Liu, Sangeeth Balakrishnan, Scott Broderick, Zipeng Guo, Qiang Zhang, Lu An, Revant Adlakha, Mostafa Nouh, Chi Zhou, Peter W. Chung & Shenqiang Ren. "Releasing chemical energy in spatially programmed ferroelectrics." Nature Communications 13, no. 1 (2022): 6959.
Lu An, Zipeng Guo*†, Zheng Li, Yu Fu, Yong Hu, Yulong Huang, Fei Yao, Chi Zhou^*, Shenqiang Ren^*. "Tailoring thermal insulation architectures from additive manufacturing." Nature communications 13, no. 1 (2022): 1-7.
Massimigliano Di Luigi, Zipeng Guo*†, Lu An, Jason N. Armstrong, Chi Zhou, and Shenqiang Ren. "Manufacturing silica aerogel and cryogel through ambient pressure and freeze drying." RSC advances 12, no. 33 (2022): 21213-21222.
Jingye Tan, Pedram Maleki, Lu An, Massimigliano Di Luigi, Umberto Villa, Chi Zhou, Shenqiang Ren, and Danial Faghihi. "A predictive multiphase model of silica aerogels for building envelope insulations." Computational Mechanics (2022): 1-23.
Yong Hu, Taishan Zhu, Zipeng Guo, Henna Popli, Hans Malissa, Yulong Huang, Lu An, Zheng Li, Jason N Armstrong, Christoph Boehme, Z Valy Vardeny, Alpha T N’Diaye, Chi Zhou, Manfred Wuttig, Jeffrey C Grossman, Shenqiang Ren. "Printing Air-Stable High-T c Molecular Magnet with Tunable Magnetic Interaction." Nano Letters (2022).
Lu An, Jason N. Armstrong, Yong Hu, Yulong Huang, Zheng Li, Donghui Zhao, Jesse Sokolow, Zipeng Guo*, Chi Zhou, and Shenqiang Ren. "High temperature ceramic thermal insulation material." Nano Research 15, no. 7 (2022): 6662-6669.
Saurabh Khuje, Firas Alshatnawi, Mohammed Alhendi, Jian Yu, Aaron Sheng, Yulong Huang, Cheng-Gang Zhuang, Jason Armstrong, Chi Zhou, Mark Poliks, Shenqiang Ren. "High-Temperature Oxidation-Resistant Printed Copper Conductors." Advanced Electronic Materials (2022): 2200979.
Lu An, Zheng Li, Zipeng Guo*, Yong Hu, Yulong Huang, Jason N. Armstrong, Chi Zhou, and Shenqiang Ren. "Transparent thermal insulation ceramic aerogel materials for solar thermal conversion." Nanoscale Advances 4, no. 20 (2022): 4291-4295.
Zipeng Guo*, Chi Zhou^*. "Recent advances in ink-based additive manufacturing for porous structures." Additive Manufacturing 48 (2021): 102405.
Ruizhe Yang, Matthew Benner, Zipeng Guo, Chi Zhou, and Jun Liu. "High‐Performance Flexible Schottky DC Generator via Metal/Conducting Polymer Sliding Contacts." Advanced Functional Materials 31, no. 43 (2021): 2103132.
Zipeng Guo*, Lu An, Sushil Lakshmanan*, Jason Armstrong, Shenqiang Ren and Chi Zhou^*. "Additive Manufacturing of Porous Ceramics With Foaming Agent." Journal of Manufacturing Science and Engineering, 144, no. 2 (2021): 021010.
Segura, Luis Javier, Tianjiao Wang*, Chi Zhou, and Hongyue Sun. "Online droplet anomaly detection from streaming videos in inkjet printing." Additive Manufacturing 38 (2021): 101835.
Wenxuan Jia, Yuen-Shan Leung, Huachao Mao, Han Xu, Chi Zhou, and Yong Chen. "Hybrid-Light-Source Stereolithography for Fabricating Macro-Objects With Micro-Textures." Journal of Manufacturing Science and Engineering 144, no. 3 (2021): 031003.
Yong Hu, Scott Broderick, Zipeng Guo*, Alpha T. N’Diaye, Cheng Li, Qiang Zhang, Yulong Huang, Chi Zhou, Shenqiang Ren. "Proton switching molecular magnetoelectricity." Nature Communications 12, no. 1 (2021): 1-9.
Chi Zhou^*, Han Xu, Yong Chen^*. "Spatiotemporal Projection-Based Additive Manufacturing: A Data-Driven Image Planning Method for Subpixel Shifting in a Split Second." Advanced Intelligent Systems (2021) DOI: 10.1002/aisy.202100079.
Yang Gao, Wei Wang, Yincheng Jin, Chi Zhou, Wenyao Xu, and Zhanpeng Jin. "ThermoTag: A Hidden ID of 3D Printers for Fingerprinting and Watermarking." IEEE Transactions on Information Forensics and Security 16 (2021): 2805-2820.
Nanditha Anandakrishnan, Hang Ye*, Zipeng Guo*, Zhaowei Chen, Kyle I. Mentkowski, Jennifer K. Lang, Nika Rajabian, Stelios T. Andreadis, Zhen Ma, Joseph A. Spernyak, Jonathan F. Lovell, Depeng Wang, Jun Xia, Chi Zhou^*, Ruogang Zhao^*. " Fast stereolithography printing of large‐scale biocompatible hydrogel models." Advanced Healthcare Materials 10, no. 10 (2021): 2002103. (Cover Page)
Lu An, Baoshan Liang, Zipeng Guo*, Jieyu Wang, Chi Zhou, Changning Li, Yulong Huang, Yong Hu, Zheng Li, Jason N. Armstrong, Danial Faghihi and Shenqiang Ren, “Wearable Aramid-Ceramic Aerogel Composite for Harsh Environment.” Advanced Engineering Materials (2020) DOI: /10.1002/adem. 202001169
Arvid Mohammad Masud, Chi Zhou, Nirupam Aich "3D Printed Graphene-Biopolymer Aerogel for Water Contaminant Removal: A Proof of Concept." Environmental Science: Nano (2021) DOI: 10.1039/ D0EN00953A (published as a cover article in ES:Nano, Best Papers 2021)
Yong Hu, Zipeng Guo*†, Andrew Ragonese, Taishan Zhu, Saurabh Khuje, Changning Li, Jeffrey C. Grossman, Chi Zhou^*, Mostafa Nouh^*, Shenqiang Ren^*. "A 3D-printed molecular ferroelectric metamaterial." PNAS, 117, no. 44 (2020): 27204-27210.
Hongyue Sun, Giulia Pedrielli, Guanglei Zhao*, Chi Zhou, Wenyao Xu, and Rong Pan. "Cyber Coordinated Simulation for Distributed Multi-Stage Additive Manufacturing Systems." Journal of Manufacturing Systems, 57 (2020): 61-71.
Zipeng Guo*, Ruizhe Yang, Tianjiao Wang, Lu An, Shenqiang Ren, Chi Zhou^*."Cost-Effective Additive Manufacturing of Ambient Pressure-dried Silica Aerogel." Journal of Manufacturing Science and Engineering,10.1115/1.4048740 (2020).
Rui Ji, Zefan Shao, Zheng Li, Jieyu Wang, Lu An, Zipeng Guo*, Chi Zhou; Shenqiang Ren. "Magnetically hard ferrite nanoparticles synthesized through aerogel nanoreactor." Nanotechnology, 31, no. 46 (2020): 465606.
Jida Huang*, Luis Javier Segura, Tianjiao Wang, Guanglei Zhao, Hongyue Sun, and Chi Zhou^*. "Unsupervised Learning for the Droplet Evolution Prediction and Process Dynamics Understanding in Inkjet Printing." Additive Manufacturing (2020): 101197.
Jida Huang*, Hongyue Sun, Tsz-Ho Kwok, Chi Zhou^*, and Wenyao Xu. "Geometric Deep Learning for Shape Correspondence in Mass Customization by Three-Dimensional Printing." Journal of Manufacturing Science and Engineering 142, no. 6 (2020).
Luis Javier Segura, Guanglei Zhao*, Chi Zhou, and Hongyue Sun. "Nearest Neighbor Gaussian Process Emulation for Multi-Dimensional Array Responses in Freeze Nano 3D Printing of Energy Devices." Journal of Computing and Information Science in Engineering 20, no. 4 (2020).
Zheng Li, Scott Scheers, Lu An, Aditya Chivate*, Saurabh Khuje*, Kevin Xu, Yong Hu, Yulong Huang, Shuquan Chang, Kathy Olenick, John Olenick, Jun Hwan Choi, Chi Zhou, Shenqiang Ren. "All-Printed Conformal High-Temperature Electronics on Flexible Ceramics." ACS Applied Electronic Materials 2, no. 2 (2020): 556-562.
Hu, Feng, Lu An, Aditya Tushar Chivate*, Zipeng Guo*, Saurabh Vishwas Khuje*, Yulong Huang, Yong Hu, Jason Armstrong, Chi Zhou, and Shenqiang Ren. "Flexible and printable dielectric polymer composite with tunable permittivity and thermal stability." Chemical Communications 56, no. 15 (2020): 2332-2335.
Patatri Chakraborty, Chi Zhou, and D. D. L. Chung. "Converse piezoelectric behavior of three-dimensionally printed polymer and comparison of the in-plane and out-of-plane behavior." Materials Science and Engineering: B 252 (2020): 114447.
Pratahdeep, Gogoi, Zheng Li, Zipeng Guo*, Saurabh Khuje, Lu An, Yong Hu, Shuquan Chang, Chi Zhou, and Shenqiang Ren. "Ductile cooling phase change material." Nanoscale Advances 2, no. 9 (2020): 3900-3905.
Asmani, Mohammadnabi, Christopher Kotei, Isaac Hsia, Leo Marecki, Tianjiao Wang, Chi Zhou, and Ruogang Zhao. "Cyclic Stretching of Fibrotic Microtissue Array for Evaluation of Anti-Fibrosis Drugs." Cellular and Molecular Bioengineering 12, no. 5 (2019): 529-540.
Segura, Luis Javier, Guanglei Zhao*, Chi Zhou, and Hongyue Sun. "Nearest-neighbor Gaussian Process Emulation for Multi-dimensional Array Responses in Freeze Nano 3D Printing of Energy Devices." Journal of Computing and Information Science in Engineering (2019): 1-36.
Mriganka Roy, Reza Yavari, Chi Zhou, Olga Wodo, and Prahalada Rao. "Prediction and Experimental Validation of Part Thermal History in the Fused Filament Fabrication Additive Manufacturing Process." Journal of Manufacturing Science and Engineering 141, no. 12 (2019).
Oh, Yosep, Chi Zhou, and Sara Behdad. "The impact of build orientation policies on the completion time in two-dimensional irregular packing for additive manufacturing." International Journal of Production Research (2019): 1-15.
Jida Huang*, Tsz-Ho Kwok, Chi Zhou^*, Wenyao Xu. "Surfel convolutional neural network for support detection in additive manufacturing." The International Journal of Advanced Manufacturing Technology (2019): 1-12.
Long Jiang, Hang Ye*, Chi Zhou, and Shikui Chen. "Parametric Topology Optimization toward Rational Design & Efficient Prefabrication for Additive Manufacturing." ASME Journal of Manufacturing Science and Engineering. (2019): 141(4), 041007.
Jida Huang*, Tsz-Ho Kwok, and Chi Zhou. "Parametric design for human body modeling by wireframe-assisted deep learning." Computer-Aided Design (2019): 108, 19-29.
Tianjiao Wang*, Chi Zhou^*, and Wenyao Xu. "Online Droplet Monitoring in Inkjet 3D Printing Using Catadioptric Stereo System." IISE Transactions (2019): 51, no. 2, 153-167. (Honorable Mention of Best Application Paper)
Patatri Chakraborty, Guanglei Zhao*, Chi Zhou, Chong Cheng, and D.D.L. Chung. "Decreasing the shear-stress-induced in-plane molecular alignment by unprecedented stereolithographic delay in three-dimensional printing." Journal of Materials Science (2019): 54, no. 4, 3586-3599.
Pedram Parandoush, Chi Zhou, Dong Lin, “3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites”, Advanced Engineering Materials (2018): 1800622.
Patatri Chakraborty, Chi Zhou, and D.D.L. Chung. "Enhancing the inherent piezoelectric behavior of three-dimensionally printed acrylate polymer by electrical poling." Smart Materials and Structures (2018): 27, 115038.
Patatri Chakraborty, Guanglei Zhao*, Chi Zhou, and D.D.L. Chung. "Unprecedented sensing of interlayer defects in three-dimensionally printed polymer by capacitance measurement." Smart Materials and Structures (2018): 27(11), 115012, 7 pp.
Tianjiao Wang*, Tsz-Ho Kwok, and Chi Zhou^*. "In-situ Droplet Inspection and Closed-Loop Control System using Machine Learning for Liquid Metal Jet Printing." Journal of Manufacturing Systems, 47 (2018): 83 – 92.
Yang Yang, Xuan Song, Xiangjia Li, Zeyu Chen, Chi Zhou, Qifa Zhou, and Yong Chen. "Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures." Advanced Materials (2018) 1706539.
Yosep Oh, Sara Behdad, and Chi Zhou. "Part Decomposition and 2D Batch Placement Optimization in Single-machine Additive Manufacturing Systems." Journal of Manufacturing Systems, 48 (2018) pp. 131-139 DOI: 10.1016/j.jmsy.2018.07.006.
Jun Wang, Sonjoy Das, Rahul Rai, and Chi Zhou. "Data-driven simulation for fast prediction of pull-up process in bottom-up stereo-lithography." Computer-Aided Design (2018) DOI: 10.1016/j.cad. 2018.02.002.
Yosep Oh, Sara Behdad, and Chi Zhou. "Part Decomposition and Assembly-based (Re) Design for Additive Manufacturing: A Review." Additive Manufacturing Journal (2018).
Qiangqiang Zhang, Feng Zhang*^†, Xiang Xu, Chi Zhou^*, and Dong Lin^*. "Three-Dimensional Printing Hollow Polymer Template-Mediated Graphene Lattices with Tailorable Architectures and Multifunctional Properties." ACS Nano (2018): 12, no. 2, 1096 – 1106.
Patatri Chakraborty, Chi Zhou and D.D.L. Chung. "Piezoelectric behavior of three-dimensionally printed acrylate polymer without filler or poling." Journal of Materials Science (2018): 1 – 12.
Zhiqiang Shen, Huilin Ye, Chi Zhou, Martin Kroeger, and Ying Li. "Size of Graphene Sheets Determines the Structural and Mechanical Properties of 3D Graphene Foams." Nanotechnology 29, no. 10 (2018): 104001.
Gundrati, Naga B., Patatri Chakraborty, Chi Zhou, and D. D. L. Chung. "First observation of the effect of the layer printing sequence on the molecular structure of three-dimensionally printed polymer, as shown by in-plane capacitance measurement." Composites Part B: Engineering (2017).
Feng Yang*, Guanglei Zhao*^†, Chi Zhou^*, and Dong Lin. "Phase change materials (PCM) based cold source for selective freezing 3D printing of porous materials." The International Journal of Advanced Manufacturing Technology, 95, no. 5 – 8 (2018): 2145 – 2155.
Tianjiao Wang*, Tsz-Ho Kwok, and Chi Zhou. "In-situ Droplet Inspection and Control System for Liquid Metal Jet 3D Printing Process." Procedia Manufacturing 10 (2017): 968 – 981.
Naga B. Gundrati, Patatri Chakraborty, Chi Zhou, and D.D.L. Chung. "Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer." Composites Part B: Engineering (2017). https://doi.org/10.1016/j.compositesb.2017.09.067.
Feng Zhang*, Min Wei, Vilayanur V Viswanathan, Benjamin Swart, Yuyan Shao, Gang Wu, and Chi Zhou^*. "3D Printing Technologies for Electrochemical Energy Storage." Nano Energy (2017), doi.org/10.1016/j.nanoen.2017.08.037.
Dengxin Ji, Haomin Song, Borui Chen, Feng Zhang*, Alec Cheney, Nan Zhang, Xie Zeng, Chi Zhou, Qiaoqiang Gan, and Alexander Cartwright. "Frozen “tofu” effect: engineered pores of hydrophilic nanoporous materials." ACS Omega, 2, no. 8 (2017): 4838 – 4844.
Pengli Yan, Emery Brown, Qing Su, Jun Li, Jian Wang, Changxue Xu, Chi Zhou, and Dong Lin. "3D Printing Hierarchical Silver Nanowire Aerogel with Highly Compressive Resilience and Tensile Elongation through Tunable Poisson's Ratio." Small, (2017): 1701756.
Hongzhi Guo, Zhi Sun, and Chi Zhou. "Practical Design and Implementation of Metamaterial-Enhanced Magnetic Induction Communication." IEEE Access (2017).
Guanglei Zhao*, Chi Zhou^*, and Dong Lin. "Tool Path Planning for Directional Freezing Based 3d Nano Printing Process." ASME Journal of Micro-and Nano-Manufacturing. (2017): 6(1), 010905.
Jida Huang*, Tsz-Ho Kwok, and Chi Zhou. "V4PCS: Volumetric 4PCS Algorithm for Global Registration." ASME Journal of Mechanical Design 139, no. 11 (2017): 111403.
Patatri Chakraborty, Naga B. Gundrati, Chi Zhou, and D.D.L. Chung. "Effect of stress on the capacitance and electric permittivity of three-dimensionally printed polymer, with relevance to capacitance-based stress monitoring." Sensors and Actuators A, 263C, (2017): 380 – 385.
Pedram Parandoush, Levi Tucker, Chi Zhou, and Dong Lin. "Laser Assisted Additive Manufacturing of Continuous Fiber Reinforced Thermoplastic Composites." Materials and Design. (2017): 10.1016/j.matdes.2017.06.013.
Min Wei, Feng Zhang*^†, Wei Wang, Paschalis Alexandridis, Chi Zhou^*, and Gang Wu. "3D direct writing fabrication of electrodes for electrochemical storage devices." Journal of Power Sources. (2017): 354, 134 – 147.
Hang Ye*, Chi Zhou^*, and Wenyao Xu. "Image based Slicing and Tool Path Planning for Hybrid Stereolithography Additive Manufacturing." ASME Journal of Manufacturing Science and Engineering. (2017): 10.1115/1.4035795.
Guanglei Zhao*, Dong Lin, and Chi Zhou^*. "Thermal analysis of directional freezing based graphene aerogel three-dimensional printing process." Journal of Micro and Nano-Manufacturing 5, no. 1 (2017).
Feng Zhang*, Feng Yang*, Chi Zhou^*, Dong Lin. "Parameter Study on 3D Printing Graphene Oxide based on Directional Freezing." ASME Journal of Manufacturing Science and Engineering. (2017): 139(3), 10.1115/1.4034669.
Hang Ye*, Abhishek Venketeswaran, Sonjoy Das, and Chi Zhou^*. "Investigation of Separation Force for Bottom-Up Stereolithography Process from Mechanics Perspective." Rapid Prototyping Journal, (2017): Vol. 23 Issue: 4, doi: 10.1108/RPJ-06-2016-0091.
Abhishek Patil, Yayue Pan, and Chi Zhou. "A Novel Projection based Electro-Stereolithography (PES) Process for Production of 3D Polymer-particle Composite Objects." Rapid Prototyping Journal, (2017) Vol. 23, No. 2.
Tsz-Ho Kwok, Hang Ye*, Yong Chen, Chi Zhou^*, and Wenyao Xu. "Mass Customization: Reuse of Digital Slicing for Additive Manufacturing." ASME Journal of Computing and Information Science in Engineering. 16. 3 (2017) : 17(2), 021009.
Huachao Mao, Chi Zhou, and Yong Chen. "LISA: Linear Immersed Sweeping Accumulation." SME Journal of Manufacturing Processes. (2016): 10.1016/j.jmapro.2016.06.021.
Panagiotis Vogiatzis, Shikui Chen, and Chi Zhou. "An Open Source Framework for Integrated Additive Manufacturing and Level-set based Topology Optimization." ASME Journal of Computing and Information Science in Engineering 17, no. 4 (2017): 041012.
Arzumand, Ayesha, Shruti Srinivas, Yuan Yuan, Chi Zhou, and Debanjan Sarkar. "Mechano-Morphological Characterization of Polyethylene-Glycol Based Polyurethane Microgel." Macromolecular Materials and Engineering, 301.10 (2016): 1158 – 1171.
Qiangqiang Zhang, Feng Zhang*^†, Sai Pradeep Medarametla, Hui Li, Chi Zhou^*, and Dong Lin^*. "Three-dimensional Printing of Graphene Aerogel." Small, DOI: 10.1002/smll.201503524, Vol. 12, No. 13, (2016): pp. 1702-1708. (Am score = 174)
Dong Lin, Feng Zhang*, Chao Wang, Yiqian Wang, Chi Zhou^*, and Gary J. Cheng^*. "3D Stereolithography Printing of Graphene Oxide Reinforced Complex Architectures." Nanotechnology, Vol. 26, No. 43 (2015): 434003 – 434011.
Farzad Liravi*, Sonjoy Das, and Chi Zhou^*. "Separation Force Analysis and Prediction Based on Cohesive Element Model for Constrained-Surface Stereolithography Processes." Computer-Aided Design, Vol. 69, (2015): pp. 134 – 142.
Chi Zhou^*, Hang Ye*, and Feng Zhang*. "A Novel Low-Cost Stereolithography Process Based on Vector Scanning and Mask Projection for High-Accuracy, High-Speed, High-Throughput, and Large-Area Fabrication." ASME Journal of Computing and Information Science in Engineering 15.1 (2015): 011003.
Chi Zhou^*. "A Direct Tool Path Planning Algorithm for Line Scanning Based Stereolithography." ASME Journal of Manufacturing Science and Engineering 136.6 (2014): 061023.
Yayue Pan, Chi Zhou, Yong Chen, and Jouni Partanen. "Multi-tool and Multi-axis CNC Accumulation for Fabricating Conformal Features on Curved Surfaces." ASME Journal of Manufacturing Science and Engineering, Vol. 136, No. 3, (2014): pp. 031007.
Xuejin Zhao, Yayue Pan, Chi Zhou, Yong Chen, and Charlie C. L. Wang. "An Integrated CNC Accumulation System for Automatic Building-around-inserts." SME Journal of Manufacturing Process, Vol. 15, No.4, (2013): pp. 432 – 443.
Chi Zhou, Yong Chen, Zhigang Yang, and Behrokh Khoshnevis. "Development of a Multi-material Mask-Image-Projection-based Stereolithography for the Fabrication of Digital Materials." Rapid Prototyping Journal, Vol. 19, No.3, (2013): pp. 153 – 165.
Yayue Pan, Chi Zhou, and Yong Chen. "A fast mask projection stereolithography process for fabricating digital models in minutes." ASME Journal of Manufacturing Science and Engineering, Vol.134, No.5, (2012): pp. 051011.
Yayue Pan, Xuejin Zhao, Chi Zhou, and Yong Chen. "Smooth Surface Fabrication in the Mask Projection based Stereolithography." SME Journal of Manufacturing Processes, Vol. 14, (2012): pp. 460 – 470.
Chi Zhou, Yong Chen. "Additive Manufacturing based on Optimized Mask Video Projection for Improved Accuracy and Resolution." SME Journal of Manufacturing Processes, Vol. 14, No. 2, (2012): pp. 107 – 118.
Yong Chen, Chi Zhou, and Jingyuan Lao. "A Layerless Additive Manufacturing Process based on CNC Accumulation." Rapid Prototyping Journal, Vol.17, No.3, (2011): pp. 218-227. (Outstanding Paper Award of the year)
Chi Zhou, Yong Chen, and Richard A. Waltz. "Optimized Mask Image Projection for Solid Freeform Fabrication." ASME Journal of Manufacturing Science and Engineering, Vol. 131, No. 6, (2009): pp. 061004- 1~12.

Zipeng Guo*, Ruizhe Yang, Jun Liu, Jason Armstrong, Ruogang Zhao, and Chi Zhou^*. "Continuous Stereolithography 3D Printing of Multi-Network Hydrogels in Triply Periodic Minimal Structures (TPMS) With Tunable Mechanical Strength for Energy Absorption." In ASME International Mechanical Engineering Congress and Exposition, vol. 86656, p. V003T03A021. American Society of Mechanical Engineers, 2022.
Aditya Chivate, Zipeng Guo, and Chi Zhou. "Study of Proximity Effect in Projection-Based Micro Stereolithography Process." In 2022 International Solid Freeform Fabrication Symposium. 2022.
Rubino, Matthew, Michelle Weng, Jiasheng Chen, Shardul Saptarshi, Marcus Francisco, Alex Francisco, Chi Zhou, Hongyue Sun, and Wenyao Xu. "A Campus Prototype of Interactive Digital Twin in Cyber Manufacturing." In Proceedings of the 20th ACM Conference on Embedded Networked Sensor Systems, pp. 758-759. 2022.
Aditya Chivate*, Chi Zhou^*. "A Modified Schlieren System for In-Situ Voxel Growth Observation in Projection-Based Stereolithography Process." ASME Manufacturing Science and Engineering Conference (MSEC), West Lafayette, Indiana, June 27 – July 1, 2022.
Zipeng Guo*, Fan Fei, Xuan Song, Chi Zhou, Chi Zhou^*. "Analytical Study of Shear-Thinning Fluid Flow in Direct Ink Writing Process." ASME Manufacturing Science and Engineering Conference (MSEC), West Lafayette, Indiana, June 27 – July 1, 2022.
Zipeng Guo*, Lu An, Sushil Lakshmanan*, Jason Armstrong, Shenqiang Ren and Chi Zhou^*. "Additive Manufacturing of Porous Ceramics With Foaming Agent." ASME Manufacturing Science and Engineering Conference (MSEC), Cincinnati, Ohio, June 22 – June 25, 2021.
Wenxuan Jia, Yuen-Shan Leung, Huachao Mao, Han Xu, Chi Zhou and Yong Chen. "Hybrid-Light-Source Stereolithography for Fabricating Macro-Objects with Micro-Textures." ASME Manufacturing Science and Engineering Conference (MSEC), Cincinnati, Ohio, June 22 – June 25, 2021. (MSEC Best Paper Award)
Yang Gao, Wei Wang, Yincheng Jin, Chi Zhou, Wenyao Xu, and Zhanpeng Jin. "ThermoTag: A Hidden ID of 3D Printers for Fingerprinting and Watermarking." IEEE Transactions on Information Forensics and Security 16 (2021): 2805-2820.
Jida Huang*, Tianjiao Wang, Luis Javier Segura, Gayatri Shirish Joshi, Hongyue Sun, Chi Zhou^*. " Spatiotemporal Fusion Network for the Droplet Behavior Recognition in Inkjet Printing." ASME Manufacturing Science and Engineering Conference (MSEC), Cincinnati, Ohio, June 22 – June 26, 2020.
Zipeng Guo*, Ruizhe Yang, Tianjiao Wang, Lu An, Shenqiang Ren, Chi Zhou^*. "Experimental Study on Cost-Effective Additive Manufacturing of Silica Aerogel." ASME Manufacturing Science and Engineering Conference (MSEC), Cincinnati, Ohio, June 22 – June 26, 2020.
Luis Javier Segura, Narváez Muñoz, Chi Zhou, and Hongyue Sun, “Sketched-based tensor decomposition for non-parametric monitoring of electrospinning processes”, ASME Manufacturing Science and Engineering Conference (MSEC), Cincinnati, Ohio, June 22 – June 26, 2020.
Jida Huang*, Hongyue Sun, Tsz-Ho Kwok, Chi Zhou^*, and Wenyao Xu. "Geometric deep learning for shape correspondence in mass customization." ASME Manufacturing Science and Engineering Conference (MSEC), Erie, PA, June 10 – June 14, 2019.
Luis Javier Segura, Guanglei Zhao*, Hongyue Sun, and Chi Zhou. "Gaussian Process Tensor Responses Emulation for Droplet Solidification in Freeze Nano 3D Printing of Energy Products." ASME Manufacturing Science and Engineering Conference (MSEC), Erie, PA, June 10 – June 14, 2019.
Sahand Hajifar, Ramanarayanan Purnanandam*, Hongyue Sun, and Chi Zhou. "Exploring the Multi-Stage Effects of Material Preparation and Printing on 3D Printing Product Quality." ASME Manufacturing Science and Engineering Conference (MSEC), Erie, PA, June 10 – June 14, 2019.
Roy, Mriganka, Reza Yavari, Chi Zhou, Olga Wodo, and Prahalad Rao. "Modeling and Experimental Validation of Part-Level Thermal Profile in Fused Filament Fabrication." ASME Manufacturing Science and Engineering Conference (MSEC), Erie, PA, June 10 – June 14, 2019.
Gao, Yang, Borui Li, Wei Wang, Wenyao Xu, Chi Zhou, and Zhanpeng Jin. "Watching and safeguarding your 3d printer: Online process monitoring against cyber-physical attacks." Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies 2, no. 3 (2018): 1-27.
Hang Ye*, Tsz-Ho Kwok, Chi Zhou^*, and Wenyao Xu. "Information Reuse to Accelerate Customized Product Slicing for Additive Manufacturing." Proceedings of ASME Computers and Information in Engineering Conference, DETC2018, Quebec City, Canada, Aug. 26 – Aug. 29, 2018.
Yosep Oh, Sara Behdad, and Chi Zhou. "Production Planning for Mass Customization in Additive Manufacturing: Build Orientation Determination, 2D Packing and Scheduling." Proceedings of ASME Computers and Information in Engineering Conference, DETC2018, Quebec City, Canada, Aug. 26 – Aug. 29, 2018.
Hongyue Sun, Giulia Pedrielli, Guanglei Zhao*, Andrea Bragagnolo, Chi Zhou, Rong Pan, Wenyao Xu, "Cyber-coordinated Simulation Models for Multi-stage Additive Manufacturing of Energy Products", IEEE International Conference on Automation Science and Engineering (CASE'18), Munich, Germany, August, 2018.
Jida Huang*, Tsz-Ho Kwok, Chi Zhou^*, and Wenyao Xu. "Geometric Deep Learning for On-demand Production of Customized Products by Additive Manufacturing." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 13 – 15, 2018.
Chen Song, Zhengxiong Li, Wenyao Xu, Chi Zhou, Zhanpeng Jin, and Kui Ren. "My Smartphone Recognizes Genuine QR Codes! Practical Unclonable QR Code via 3D Printing." ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp’18), Singapore, October 2018
Aosen Wang, Tianjiao Wang*, Chi Zhou, and Wenyao Xu. "LuBan: Low-Cost and In-Situ Droplet Micro-Sensing for Inkjet 3D Printing Quality Assurance." 15th ACM Conference on Embedded Networked Sensor Systems (SenSys 2017), Delft, Netherlands, Nov. 2017 (Acceptance Rate: 17.2%, 26 out of 151)
Jida Huang*, Tsz-Ho Kwok, and Chi Zhou. "V4PCS: Volumetric 4PCS Algorithm for Global Registration." Proceedings of ASME Computers and Information in Engineering Conference, DETC2017, Cleveland, Ohio, Aug. 6 – Aug. 9, 2017.
Yosep Oh, Sara Behdad, and Chi Zhou. "Part Separation methods for Assembly based Design in Additive Manufacturing." Proceedings of ASME Computers and Information in Engineering Conference, DETC2017, Cleveland, Ohio, Aug. 6 – Aug. 9, 2017.
Long Jiang, Hang Ye*, Chi Zhou^*, Shikui Chen, and Wenyao Xu. "A Parametric Level Set Approach toward Rational Design & Efficient Prefabrication for Additive Manufacturing." ASME Manufacturing Science and Engineering Conference (MSEC), Los Angeles, CA, June 4 – June 8, 2017.
Guanglei Zhao*, Chi Zhou^*, and Dong Lin. "Tool Path Planning for Directional Freezing Based 3D Nano Printing Process." ASME Manufacturing Science and Engineering Conference (MSEC), Los Angeles, CA, June 4 – June 8, 2017.
Tianjiao Wang*, Tsz-Ho Kwok, and Chi Zhou. "In-situ Droplet Inspection and Control System for Liquid Metal Jet 3D Printing Process." SME North American Manufacturing Research Conference, NAMRC45, Los Angeles, CA, June 4 – 8, 2017
Jerry Ajay, Chen Song, Aditya Singh Rathore, and Chi Zhou, Wenyao Xu. "Instruction Level Power Analysis and Optimization of 3D Printers." The 22nd ACM International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS 2017), Xi’an, China, April 8 – 12, 2017. (Acceptance Rate: 17.4%, 56 out of 321)
Aosen Wang, Chi Zhou, Zhanpeng Jin, and Wenyao Xu. "Towards scalable and efficient GPU-enabled slicing acceleration in continuous 3D printing." In 2017 22nd Asia and South Pacific Design Automation Conference (ASP-DAC), pp. 623-628. IEEE, 2017. (Best Paper Nomination)
Dengxin Ji, Haomin Song, Borui Chen, Feng Yang, Alec R. Cheney, Feng Zhang*, Nan Zhang, Xie Zeng, John D. Atkinson, Chi Zhou, Alexander N. Cartwright, and Qiaoqiang Gan. "Engineered pores of hydrophilic nanoporous materials using wet-drying and freeze-drying." In Lasers and Electro-Optics (CLEO), 2017 Conference on, pp. 1 – 2. IEEE, 2017.
Nanditha Anandakrishnan, Hang Ye*, Chi Zhou, and Ruogang Zhao. "Rapid Stereolithography Printing of Human-scale Vascularized Tissue." Biomedical Engineering Society Annual Meeting, Pheonix, AZ, 2017
Jerry Ajay, Aditya Singh Rathore, Chen Song, Chi Zhou, and Wenyao Xu. "Don’t Forget Your Electricity Bills! An Empirical Study of Characterizing Energy Consumption of 3D Printers." ACM Asia-Pacific Workshop on Systems (APSys), Hong Kong, China, Aug 4 – 5, 2016.
Chen Song, Feng Lin, Zongjie Ba, Kui Ren, Chi Zhou, and Wenyao Xu. "My Smartphone Knows What You Print: Exploring Smartphone-based Side-channel Attacks Against 3D Printers." The 23nd ACM Conference on Computer and Communications Security (CCS 2016), Hofburg Palace, Vienna, Austria October 24 – 28, 2016. (Acceptance Rate: 16.4%, 137 out of 831.)
Fan Yang, Feng Lin, Chi Zhou, Zhanpeng Jin, and Wenyao Xu. "PBench: A Benchmark Suite for Characterizing 3D Printing Prefabrication." Workload Characterization (IISWC), IEEE International Symposium, pp. 1 – 10. IEEE, RI, USA, 2016. (Acceptance Rate: 30.4%, 21 out of 69)
Tsz-Ho Kwok, Hang Ye*, Yong Chen, Chi Zhou^*, and Wenyao Xu. "Mass Customization: Reuse of Digital Slicing for Additive Manufacturing." Proceedings of ASME Computers and Information in Engineering Conference, DETC2016, Charlotte, North Carolina, Aug. 21 – Aug. 24, 2016.
Hang Ye*, Chi Zhou^*, and Wenyao Xu. "Mass Customization: Reuse of Topology Information to Accelerate Slicing Process for Additive Manufacturing." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2016.
Feng Zhang*, Qiangqiang Zhang, Weston Grove, Dong Lin, and Chi Zhou. "3D-printing Graphene Oxidize Based on Directional Freezing." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2016.
Hang Ye*, Chi Zhou^*, and Wenyao Xu. "Image based Slicing and Tool Path Planning for Hybrid Stereolithography Additive Manufacturing." Proceedings of ASME Computers and Information in Engineering Conference, DETC2016, Charlotte, North Carolina, Aug. 21 – Aug. 24, 2016.
Jun Wang, Sonjoy Das, Chi Zhou, and Rahul, Rai. "Data-driven Simulation for Fast Prediction of Pull-up Process in Bottom-up Stereo-lithography." Proceedings of ASME Computers and Information in Engineering Conference, DETC2016, Charlotte, North Carolina, Aug. 21 – Aug. 24, 2016.
Guanglei Zhao*, Chi Zhou^*, and Dong Lin. "Thermal Analysis on Directional Freezing of Nano Aqueous Suspensions in Graphene Aerogel 3D Printing Process." ASME Manufacturing Science and Engineering Conference (MSEC), Blacksburg, Virginia, June 27 – July 1, 2016.
Feng Zhang*, Feng Yang*, Chi Zhou^*, and Dong Lin. "Parameter Study on 3D Printing Graphene Oxide based on Directional Freezing." ASME Manufacturing Science and Engineering Conference (MSEC), Blacksburg, Virginia, June 27 – July 1, 2016.
Huachao Mao, Chi Zhou, and Yong Chen. "LISA: Linear Immersed Sweeping Accumulation." SME North American Manufacturing Research Conference, NAMRC44, Blacksburg, Virginia, June 27 – July 1, 2016. (NAMRC Outstanding Paper Award)
Dengxin Ji, Haomin Song, Borui Chen, Alec Cheney, Nan Zhang, Tim Thomay, Chi Zhou, Qiaoqiang Gan, and Alexander Cartwright. "Reversibly tunable hydrophilic nano/microporous polymer photonic crystal." In Frontiers in Optics, pp. FTu1F-6. Optical Society of America, 2016.
Dengxin Ji, Haomin Song, Borui Chen, Alec Cheney, Nan Zhang, Tim Thomay, Chi Zhou, Qiaoqiang Gan, and Alexander Cartwright. "Pore size manipulation of hydrophilic nano/microporous polymer photonic crystal." In CLEO: Science and Innovations, pp. JTh2A-70. Optical Society of America, 2016.
Feng Zhang*, Chi Zhou^*, and Sonjoy Das. "An Efficient Design Optimization Method for Functional Gradient Material Objects based on Finite Element Analysis." Proceedings of ASME Computers and Information in Engineering Conference, DETC2015, Boston, Massachusetts, Aug. 2 – Aug. 5, 2015.
Guanglei Zhao*, Chi Zhou^*, and Sonjoy Das. "Solid Mechanics based Design and Optimization for Support Structure Generation in Additive Manufacturing." Proceedings of ASME Computers and Information in Engineering Conference, DETC2015, Boston, Massachusetts, Aug. 2 – Aug. 5, 2015.
Hang Ye*, Sonjoy Das, and Chi Zhou^*. "Investigation of separation force for bottom-up stereolithography process from mechanics perspective." Proceedings of ASME Computers and Information in Engineering Conference, DETC2015, Boston, Massachusetts, Aug. 2 – Aug. 5, 2015.
Chi Zhou^*, Hang Ye*, and Feng Zhang*. "A Novel Low-cost Stereolithography Process based on Vector Scanning and Mask Projection for High-accuracy, High-speed, High-throughput and Large-area Fabrication." Proceedings of ASME Computers and Information in Engineering Conference, DETC2014, Buffalo, New York, Aug. 17 – Aug. 20, 2014.
Chi Zhou^*. "A Direct Tool Path Planning Algorithm for Line Scanning based Stereolithography." ASME International Mechanical Engineering Congress & Exposition, IMECE2014, Montreal, Canada, November. 14 – 20, 2014..
Farzad Liravi*, Sonjoy Das, and Chi Zhou^*. "Separation Force Analysis and Prediction Based on Cohesive Delamination Model for Bottom-up Stereolithography Using Finite Element Analysis." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 –10, 2014.
Chi Zhou^*, Hang Ye*, and Feng Zhang*. "A Hybrid Additive Manufacturing Process based on Laser Scanning and Mask Projection for Improved Fabrication Performance." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2014.
Xuejin Zhao, Yayue Pan, Chi Zhou, Yong Chen, and Charlie C. L. Wang. "An Integrated CNC Accumulation System for Automatic Building-around-inserts." SME North American Manufacturing Research Conference, NAMRC41, Madison, Wisconsin, June 10 – 14, 2013. (NAMRC Outstanding Paper Award)
Yayue Pan, Yong Chen, and Chi Zhou. "Fast Recoating Methods for the Projection-based Stereolithography Process in Micro- and Macro-scales." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2012.
Dongping Deng, Yong Chen, and Chi Zhou. "Investigation on PEEK Fabrication Using Mask image projection based Stereolithography." Proceeding of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2012.
Chi Zhou, Hamid R. Chabok, Yong Chen, Qifa Zhou, and Kirk K. Shung. "Ultrasound Transducer Array Fabrication based on Additive anufacturing of Piezocomposites." Proceedings of ASME/ISCIE International Symposium on Flexible Automation (ISFA), St. Louis, Missouri, June 18 – 20, 2012.
Yayue Pan, Chi Zhou, and Yong Chen. "Rapid Manufacturing in Minutes: the Development of a Mask Projection Stereolithography Process for High Speed Fabrication." Proceeding of the International Manufacturing Science and Engineering Conference, MSEC2012, Notre Dame, Indiana, June 4 – 8, 2012. (MSEC Best Paper Award – Third Place)
Yayue Pan, Yong Chen, and Chi Zhou. "Fabrication of Smooth Micro- and Meso- Channels based on Mask Projection Stereolithography." Proceeding of the International Manufacturing Science and Engineering Conference, MSEC2012, Notre Dame, Indiana, June 4 – 8, 2012.
Yayue Pan, Xuejin Zhao, Chi Zhou, and Yong Chen. "Smooth Surface Fabrication in the Mask Projection based Stereolithography." SME North American Manufacturing Research Conference, NAMRC40, Notre Dame, Indiana, June 4 – 8, 2012.
Chi Zhou, Yong Chen, Zhigang Yang, and Behrokh Khoshnevis. "Development of a Multi-material Mask-Image-Projection-based Stereolithography for the Fabrication of Digital Materials." Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2011.
Xuejin Zhao, Yayue Pan, Chi Zhou, Yong Chen, and Charlie C. L. Wang. "Building around Inserts based on Automatic 5-Axis CNC Accumulation." Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 10, 2011.
Chi Zhou, Yong Chen. "Additive Manufacturing based on Optimized Mask Video Projection for Improved Accuracy and Resolution." SME North American Manufacturing Research Conference, NAMRC39, Corvallis, Oregon, June 13 – 17, 2011. (NAMRC Outstanding Paper Award – First Place)
Yayue Pan, Chi Zhou, Yong Chen, and Jouni Partanen. "Fabrication of Conformal Ultrasound Transducer Arrays and Horns Based on Multi-axis CNC Accumulation." ASME International Manufacturing Science and Engineering Conference, MSEC2011-50139, Corvallis, Oregon, June 13 – 17, 2011.
Yong Chen, Chi Zhou, and Jingyuan Lao. "Additive Manufacturing without Layers: A New Solid Freeform Fabrication Process based on CNC Accumulation." Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 11, 2010. (SFF Symposium Outstanding Paper)
Hamid Reza Chabok, Chi Zhou, Yong Chen, Qifa Zhou, and K. Kirk Shung. "Development of a Digital Micro-Manufacturing Process for High Frequency Ultrasound Transducers." IEEE International Ultrasonics Symposium (IUS), San Diego, California, October 11 – 14, 2010.
Chi Zhou, Yong Chen. "Additive Manufacturing Based on Multiple Calibrated Projectors and Its Mask Image Planning." Proceedings of ASME Internal Design Engineering Technical Conferences. Montreal, Quebec, Canada, August 15 – 18, 2010.
Chi Zhou, Yong Chen, and Richard A. Waltz. "Optimized Mask Image Projection for Solid Freeform Fabrication." ASME Design Automation Conference, DETC2009/DAC-86268, San Diego, California, Aug. 30 – Sept. 2, 2009.
Yongqiang Li, Yong Chen, and Chi Zhou. "Design of Flexible Skin for Target Displacements based on Meso-Structures." Proceedings of ASME Computers and Information in Engineering Conference, DETC2009/DAC-86268, San Diego, California, Aug. 30 – Sept. 2, 2009.
Chi Zhou, Yong Chen. "Calibrating Large-area Mask Projection Stereolithography for Its Accuracy and Resolution Improvements." Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 8 – 11, 2009
Chi Zhou, Yong Chen. "Three-Dimensional Digital Halftoning for Layered Manufacturing based on Droplets." Transactions of North American Manufacturing Research Institute of SME, Vol. 37, pp. 175 – 182, 2009.
Chi Zhou. "Physical Model based Process Planning for Direct Digital Manufacturing." Poster of ASME Internal Design Engineering Technical Conferences. August 30 – September 2, 2009, San Diego, California, USA. (Best Student Poster)

热点大瓜

Chi Zhou

PhD

Chi Zhou

PhD

Chi Zhou

PhD

Research Topics

Contact Information

Refereed Journal Articles Published

Conference Proceedings